Remove plaster that moisture has damaged
Damp can leave plaster stained, soft, loose or contaminated long after the first mark appears. Covering it with another skim won't repair a failed background. We remove the affected material to the extent required, which may mean taking the wall back to brick. The exposed area can then be prepared for the agreed damp treatment. Where injection is specified, we drill and inject before rebuilding the background with the required sand and cement. New plaster completes the surface, bringing treatment and reinstatement into one planned remedial programme.
Protect the room and allow for each stage
Removing damaged plaster creates dust and debris, so we discuss room clearance, access and protection before work begins. The wall may also need drying time between parts of the repair. We explain those stages and leave the completed plaster ready for suitable drying before decoration. The quotation depends on wall size, depth of damage, chosen moisture treatment and the build-up needed for reinstatement. By setting out the full sequence at the start, we reduce the chance of the repair stopping halfway with a bare wall and no agreed finish.
Frequently asked questions
Why can't damp plaster simply be skimmed over?
Loose or contaminated plaster doesn't provide a sound base for a new skim, and moisture may continue to affect the finish. We assess how far the damage extends and remove the material required before treatment and reinstatement.
Does the wall always need stripping back to brick?
Not in every case. The removal follows the affected and unsound area. Where deeper damage or the chosen treatment requires full access, we may take plaster back to brick. We explain the proposed extent before starting.
What happens after the damp treatment is installed?
We rebuild the wall using the specified background and plaster finish. Drying stages must be respected before decoration. The exact build-up depends on the treatment, wall condition and depth of material removed.